This machine is designed to fill dry dusty granular products into ready-made plastic cups.
The filler doses products by a rotary auger.
The dose quantity is set by RPM and size of the auger.
The filler runs automatically and is controlled by a programmable controller.
The following products can be handled: |
Spices, salt, dried milk, starch, ground coffee, various dry cleaners.
- auger filler on a stand;
- conveyor;
- accumulating table;
- dust exhausting unit.
Performance specification of the auger filler: |
1. Capacity, max: 40 to 45 doses/min
2. Dosing accuracy, %: ±1.5 (Accuracy can be higher at a reduced capacity)
3. Auger diameter: 45 mm
4. Power supply: 380 V, 50 Hz, 3-phase
5. Rated power, max: 2.3 kW
6. Air pressure: 0.6 MPa
7. Overall dimensions:
- Length 1,300 mm
- Width 860 mm
- Height 800 mm
8. Weight : 180 kg
- Agitator;
- Filling auger with a tube;
- Drive unit;
- Control unit;
- Feeding hopper
- Dust exhaust unit;
- Unit to cut off a cup from the pile and to locate it in the filling position. The unit is adapted to handle a specific container (cup);
- Pouring funnel adapted to a mouth of specific cups.
Products are poured through a ferrule into a feeding hopper furnished with an agitator that is moving the products to the auger. Then the rotary auger conveys the products along the screw pipe to the funnel and from there into a cup on the conveyor.
| 
