(Filling and packaging machinery for dry stuff products)
This machine is designed to dose fill granular, free-flowing and dust
forming products.
Rotary screw in the filler is dose filling products. Portion volume is
set by RPM and dimensions of the screw.
Filler works in a stepwise cycle mode and is controlled by a programmable
controller.
All data is output on LCD.
The following products can be filled: Starch, flour,
dried milk, detergent powder and etc.
Performance specification: |
Capacity kinematic, max (depends on portion volume)
portions/min 20 to 60
Accuracy of a portion, max (depends on capacity, dose and type
of filled products) % 1 to 2
Power supply V Hz 380 ; 50 (3 phases)
Power kW 1.5
Air pressure MPa 0.,6
Overall dimensions mm 940x820s1100
Weight kg 180
- agitator
- measuring auger with a screw tube
- drive unit
- control system
- loading hopper
Products to be weighed are fed into a feeding hopper through a pipe piece
in its cover. Inside the hopper products are stirred with a mixer in the
auger area; the same mixer removes products from the feeding hopper walls.
Auger diameter is selected in accordance with dosing volume. There is
a sensor to control products level in the hopper that is giving a command
to fill an auger filler and to suspend products feed into a hopper. Then,
product is dumped from a hopper through a filling tube into a bag.
Dust exhaust system
Products flow cut off valve.
| 
