Pactpack-R2 to dose fill granulated cottage cheese

This automatic rotary machine is designed to fill granulated cottage cheese with cream in plastic cups with their further sealing with aluminum foil and capping.

Weigher to dose fill granulated cottage cheese and volumetric filler to add cream are mounted on the machine.

Operation of the granulated cottage cheese weighing filler:
Products to be weighed are poured to the hopper and transferred to the loosener by a screw. Loosener is virtually a shaft with vertical plates that prevents cottage cheese from falling in big lumps into accumulating hopper. At the accumulating hopper bottom there are sliding shutters driven by two air cylinders.

In the weighing point an elevator lifts a cup to fill it with cottage cheese; when a load cell responds the sliding shutters close, a cup drops and moves further to the position where cream is added, foil lid is sealed, date is printed, etc.

The following products can be weighed:
Granulated cottage cheese with cream

1. Plastic cup sizes:
   Diameter  95/110 mm
   Height  60… 120 mm
2. Patterns of packages:
   Plastic cup + foil lid
   Plastic cup + cap
   Plastic cup + foil lid + cap
3. Dose weight: 150 to 500 g (cream dose: 50 to 200 ml)
4. Filler type: weigher (to fill cottage cheese) and volumetric liquid (to fill scream)
5. Capacity: 10 to 14 cups/min;
6. Filling accuracy:  ± 2%
7. Power supply: 220 V; 1-ph; 50 Hz
8. Power consumption: 2.5 kW
9. Air system working pressure: 0.6 MPa
10. Rotary table drive unit: electromechanical
11. Drive unit of working units: air
12. Permissible pressure drop in the air treatment unit: 0.02 MPa
    Compressed air contamination degree at the air treatment unit inlet should meet class 7 by Russian norms and standards 17433-80 (solid particle contents up to 40 micron should not be more than 4 mg/m3; no water and oil are permitted).
13. Air flow : 550 l/min
14. Overall dimensions:
    Length 1,800 mm
    Width 1,310 mm
    Height 2,300 mm
15. Machine weight: 500 kg

• Cup feeding unit;
• Volumetric piston filler;
• Weighing filler (cottage cheese);
• Foil lid placing unit;
• Foil lid sealing unit;
• Date printing coder;
• Finished products discharging unit;
• Delivery table;
• Electrical & mechanical drive unit;
• Electrical cabinet with a control panel.

• Volumetric piston filler with a screw pump (to handle ordinary cottage cheese - capacity to 23 cups/min);
• Plastic cap placing unit;
• Discharge conveyor (plate or belt type)
• A set to facilitate change over to cups of  different size and design;
• UV lamp for bactericidal treatment of cups.