This versatile vertical filling and packaging automatic machine is designed to handle a wide array of small size items, dry dusty stuff as well as liquid and pasty products in three-seamed bags.
The machine can run with any heat sealable packaging materials: PP, high and low pressure PE film; laminated paper, foil, polyamide material, etc.
The machine operates with a picture centering by a photo mark.
The following products can be handled: ñereals, sugar, macaroni, dragee, milk powder, starch, cocoa powder, milk, mayonnaise, ketchup, detergents, etc.
Performance specification: |
| Kinematical capacity, max:
(depends on length and width of a bag; its shape; products being handled; dose volume and its accuracy) |
35 bags/min |
Bags shape: |
pillow-type bags |
|
| length |
290 (320) mm |
| width |
200 mm |
| products tube diameter |
127 mm |
Longitudinal joint: |
butt
overlapped |
| Dose weight depends on a handled product. Maximum dose weight is limited by a bag volume: |
2 litres |
Film roll dimensions: |
| diameter, max: |
350 mm |
| width, max: |
435 mm |
| Film roll weight, max: |
25 kg |
| Working air pressure: |
0.6 MPa |
| Air flow: |
300 l/min |
Power supply: |
380 V; 3-ph; 50 Hz |
| Power consumption: |
2 kW |
| Drive unit |
pneumatic electro-mechanical |
| Overall dimensions of the machine: |
| length |
1420 mm |
| width |
920 mm |
| height |
1550 mm |
Weight of machine: |
300 kg |
- Pouch forming unit;
- Film pulling unit;
- Longitudinal and cross sealing units;
- Control system (fit to work with any filler);
- Date coder in a cross sealer;
- Photo mark sensing unit (photo-cell);
- Film stopping by photo mark system.
1. Pitpack can run with the following fillers:
- Single-flow weigher;
- Two-flow weigher;
- Volumetric frictional filler;
- Auger filler;
- Volumetric liquid filler.
2. Feeding bucket conveyor;
3. Discharge belt conveyor;
4. Side fold forming unit;
5. Thermal printer;
6. Inert gas injection system;
7. Impulse sealing unit;
8. Dust exhausting system;
9. Static charge killer.
| 
