Filling and packaging machinery for dry stuff, small piece
and liquid products
This vertical machine with “pyramid” shaped bag forming unit is designed
to package free flowing, dust-forming, small piece, liquid and paste products.
There can be used any wrapping heat-seal materials (high and low density
polypropylene and, polyethylene, laminated paper, laminated foil, polyamide
and etc).
The following products can be packaged: Tea, muesli,
dry snacks, macaroni, bonbons, confectionary, mayonnaise, ketchup, mustard,
dry pancake and cake mixtures, cocoa powder based instant drinks, etc.
Performance specification: |
Capacity kinematical (max) bags/min
- with an auger filler up to 25
- with double-lane weigher f up to 20
- with volumetric filler up to 25
- with liquid filler up to 20
Working pressure in the air system MPa 0,6
Power supply
V 380
Hz 50
Drive unit Pneumatic
Power consumption kW 2
Air consumption l/min 350
Doze weight:
• Auger filler ml 20…200
• Weigher g 20…200
• Volumetric filler ml 100…200
• Liquid filler ml 20…200
Allowable variation of doze weight g
• free flowing products 1 to 2
• small piece products packaging filling accuracy depends on
packaged products and makes the weight of dozed fraction
• volumetric filler 1 to 2
• liquid filler 1 to 2
Dimensions mm 1420 x 920 x1600
Weight kg 300
Length of any “pyramid” edge mm 126
Tube diameter (max) mm 80
o Bag forming unit with a filling tube.
o Film drawing unit.
o Longitudinal and cross sealing jaws.
o Control system (fit to work with any filler).
o Thermo contact printing device.
o Photo mark sensing unit (photo-cell).
o Film stopping by photo mark system.
o Double-lane two level wheigher .
o Double-lane one level wheigher.
o Volumetric filler.
o Liquid filler.
o Hot printer.
o Feeding bucket conveyor.
o Discharge belt conveyor.
o Inert gas injection and air evacuation system;
o Static charge killer.
Distinguishing
features of the machine:
|
1. Fully automatic bag forming, products feeding and sealing process.
2. It is possible to align a picture on a bag thanks to a photo mark reading
device.
3. Manufacturing date is printed by hot printer on a bag cross seam. In-built
hot ink printer prints a date or any other information by quick-drying
ink in any location on a foil web.
4. All machine parts in contact with food products are made of stainless
steel.
5. Machine is safe and features high performance standards.
6. Machine can be made in compliance with clients’ requirements.
7. Machine is certified.
| 
