(Vacuum-molding machinery)
This machine is designed to operate with various kinds of foils and thick
sheet material.
Produced products: Parts of blister packages, bakery
correks, trays, containers, disposable plates, frame details.
It can be also used to manufacture “skin” packages (sealed package of
product with air evacuation (vacuumization) and film welding to substrate)
Performance specification: |
Operational mode: at the operator’s choice: either manual
or semi- automatic mode
Main molding area size (max), mm:
Length 1223
Width 630
Height 300
Power supply:
Voltage 380 V; 50 HZ; 3 phases
Power consumption 18 kW
Air pressure 0.4 to 0.6 MPa
It is possible to control heating and molding time,
min: 0.1…30
Overall dimensions, mm:
Length 2200
Width 1900 (with consideration of heater motion)
Height 1900
Weight, kg: 1200
Vacuum pump capacity: not less than 20 m3/hour
Drive unit: pneumatic
Used material: thermoplastic film and sheet material
up to 0.15 to 8 mm thick
Blank size (max), mm:
Sheet 680 x 1270
Reel (width) 680
Distinguishing
features of the machine:
|
1. It is possible to select an optimal operation mode: either half-automatic
or manual.
2. Simple and easy maintenance and re-set procedure.
3. It is possible to select an optimal algorithm between two possible
ones while running in a half-automatic mode.
4. It is possible to modify molding area using a set of dividing bars.
5. Machine is equipped with system to provide highest possible safety.
6. It is possible to modify a heating area by splitting it into two equal
zones; each of these zones can be independently enabled with 50 % or 100
% heating power.
7. Machine is certified.
| 
