(Vacuum-molding machinery)
This semiautomatic machine is designed to mold various items from a thermoplastic
foils in a stepwise mode. While producing square shaped packs the machine
has no material waste.
Produced production: Low size square shaped blister
packages, bakery correks, chutes and trays.
Performance specification: |
Operational mode: semi-automatic with film drawing by
operator
Max. molding depth: 30
Min width of blank clamping along mould perimeter, mm:
5
Max. molded item area: 300x400
Molding pitch accuracy while drawing foil, mm:
- longitudinal displacement not more than ±1.0
- transverse displacement not more than ±0.5
Capacity (when using PET film up to 0,2 mm thick), pcs/min:
8
Heating & molding time setting range , min: 0…30
Max heating power, kW: 4.5
Heater power density, W/cm3: 1.5
Voltage 380 V; 50 HZ; 3phases
Power consumption 5.5 kW
Air pressure 0.6 MPa
Vacuum pump capacity: not less than 20 m3/hour
Dimensions, mm:
Length 1900
Width 860
Height 1150
Weight, kg: 160
Drive unit: pneumatic
Film type: PVC, polystyrene, polyethylene terephthalate
Reel diameter (max): 600
Molded blank thickness: 0.,15…0.,3
Distinguishing
features of the machine:
|
1. Vacuum pump based vacuum system is built into a machine.
2. It is possible to control pre- heating and molding time.
3. Simple and easy maintenance
4. Machine is equipped with system to provide highest possible safety.
5. It is possible to change products dimensions and machine composition
to meet clients’ requirements.
6. Compact and universal machine design provides for rational use of production
area.
7. Machine is certified.
| 
